NewTek TriCaster Advanced Edition Automation and Integration Guide - Manual (Page 156)

144 | P a g e
select-transition (int)
Description: Select a main transition preset by position (4800CS).
Example:
Delay Shortcut Value
select-transition 3
mainbus (property_name string, property_value string)
Description: Allows you to select a transition from the from the palette in the Transition Control Area, set
the duration of the transition and set “Ping Pong”, “Reverse”, and “AutoPlay” ON/OFF. The following are
valid Property Names and their associated values.
 SelectedFXIndex-select a transition from the nine available in the pallet, valid values range from 0-
8.
 FXDuration- set to SMF speeds using values 2, 1, 0.5.
 FXPingPongs- flag “Ping Pong” setting on using either True or False
 FXReversed- flag “Reverse” setting on using either True or False
 FXAutoPlays- flag “AutoPlay setting on using either True or False
Example:
Delay Shortcut Value Key 0 Value 0 Key 1 Value 1
mainbus property_name SelectedFXIndex property_value 4
mainbus_set_transition_preset_at (index int, path string)
Description: Allows you to select a transition from the local drive and assign it to the palette in the
Transition Control Area. Index refers to the nine preset slots and valid values range from 0-8. Path is the
file path location on the local drive.
Example:
hortcut Value Key 0 Value 0 Key 1 Value 1
Mainbus_set_transition_p
reset_at
index 2 path
C:\3PLAY\Effects\Transitions\Blinds\Hard\Bl
inds 8 UL(H).trans
D.9 DSK
dsk1 (property_name string, property_value string)
Description: Allows you to set source and layer settings for the DSK.
Valid property_names and their property_values: