NavCom StarUtil-2110 Rev.B - Manual (Page 61)

StarUtil-2110 User Guide – Rev. B
DB – StarFire Satellites
The DB-StarFire Satellites tab provides a list of the licensed StarFire Satellites in the StarFire
Network(s) purchased by the user. Table 3 identifies StarFire Satellites by Network.
In addition, the DB-StarFire Satellites tab lists the licensed user-defined satellite if it is defined. It
is the seventh satellite in the list.
‡
Refer to the section, Define Satellite, in Chapter 6 for details on the user-defined
satellite.
Table 3: StarFire Satellites
Network Satellite ID Longitude
Satellite
Name
Uplink Site
402 98W PAC-E Laurentides
609 109E IND-E Perth Net 1
525 25E IND-W Burum
358 142W PAC-C Santa Paula
643.5 143.5E PAC-W Auckland Net 2
484.5 15.5W AOR-E Southbury
‡
The Satellite IDs may change after September 19, 2008, as replacement
satellites are brought into service for these aging satellites.
9 Click the Retrieve button to view the current list of licensed StarFire satellites, and the user-
defined satellite (if defined).
•
Satellite Selection Mode: Displays Automatic to indicate that the receiver is set to
automatically select the highest licensed available satellite from the list. Displays Manual
to indicate that the satellite in use is manually selected.
Figure 53: DB – StarFire Satellites
6-59