NavCom StarUtil-2110 Rev.B - Manual (Page 13)

StarUtil-2110 User Guide – Rev. B
Chapter 1 ................................................................................... Introduction
StarUtil-2110 Overview
StarUtil-2110 is a NavCom developed utility designed to configure and view many (but not all) of
the SF-2110 functions. (Refer to the SF-2110 Technical Reference Manual for the complete set
of commands and responses utilized by the SF-2110 receiver.) In addition to its setup
capabilities, StarUtil-2110 can capture and log data, upload new software and licenses to the
internal processors, and query and display various receiver performance functions. Though it is
primarily an Engineering tool, it has its own place in the commercial market as well.
‡
StarUtil-2110 is provided on the CD-ROM (P/N 96-314001-3001) included with
the SF-2110 receiver. It runs on PCs only. No special drivers are required.
9 Insert the supplied CD-ROM into the CD-ROM drive. Locate the file, StarUtil-2110.exe, and
save it to a folder on the PC. Double-click the file to run StarUtil-2110.
StarUtil-2110 GUI
1-11
Figure 1: StarUtil-2110 Window
Configure PC COM Port (see Figure 2) View B1 Solution (see Figure 28)
Close PC COM Port View B1 Solution Plot (see Figure 29)
Configure Data Logging (see Figure 38) Configure Receiver Ports (see Figure 4)
Configure Receiver Rover / Navigation &
Tracking Settings (see Figure 8) Configure Vertical Antenna Bias
(see Figure 12)
View Satellite Status - Message 0x86
(see Figure 26)
Status Bar
Naks Tab Input Tab
Messages Tab
(NCT Binary
Messages)