NavCom StarUtil-2110 Rev.B - Manual (Page 53)

StarUtil-2110 User Guide – Rev. B
Define Satellite
With direction from NavCom, select this option to add (or delete) one licensed user-defined
StarFire satellite to be available for automatic or manual selection. The user-defined satellite is
a new satellite in the StarFire network or a backup StarFire satellite.
‡
Only one satellite can be user-defined. A new user-defined satellite overwrites
the previous user-defined satellite.
Figure 45: Define Satellite Window
Enter User-Defined Satellite
9 Select Receiver > Setup > StarFire > Define Satellite. The Define Satellite window opens
(see Figure 45).
9 Click the check box to the left of Enter User-Defined Satellite.
9 With direction from NavCom, enter the Frequency(KHz) and the Satellite ID for the user-
defined satellite.
9 Click the OK button.
9 Confirm that the entry of the user-defined satellite is successful:
• Select
View > DB - StarFire Satellites. The DB-StarFire Satellites tab opens (see
Figure 53).
• Click
the Retrieve button.
• The new user-defined satellite is listed on row 7 of the tab.
Delete User-Defined Satellite
9 Select Receiver > Setup > StarFire > Define Satellite. The Define Satellite window opens
(see Figure 45).
9 Click the check box to the left of Delete User-Defined Satellite.
9 Click the OK button.
9 Confirm that the user-defined satellite is deleted:
• Select
View > DB - StarFire Satellites. The DB-StarFire Satellites tab opens (see
Figure 53).
• Click
the Retrieve button.
• Row 7 on the tab is blank if the user-defined satellite is deleted.
6-51