MovinCool CM25 Service Manual - Manual (Page 69)

Repair Section
69
7.2 Disassembly
1) Loosen the bottom screw.
2) Take out the nine (9) screws, and then remove
the service panel.
3) Disconnect the two (2) power supply lines from
the terminal, and disconnect the ground line.
CAUTION
• Ground tightening torque:
- 1.0 ± 0.15 ft•lbf (1.3 ± 0.2 N•m)
4) Take out the twenty-eight (28) screws, and then
remove the top panel.
I003120
Screws (9)
Bottom Screw (1)
Service Panel
I003182
Ground Line
Power Supply Line
Terminal
I003122
Screws (8)
Screws (4)
Top Panel
Top Panel
Screws (4)
Screws (12)