MovinCool CM25 Service Manual - Manual (Page 17)

Operation Section
17
3.3 Basic Construction
• The MovinCool CM 25 is compact in
construction due to the condenser and
evaporator being enclosed in one unit. The
interior of the unit is divided into two sections.
One section contains the evaporator which
cools room interior air. The other section is
comprised of the condenser, compressor and
control box.
3.4 Air Flow
• Air drawn from the condenser intake passes
over the condenser, extracting heat from the
refrigerant. The hot air is blown out through the
condenser exhaust air vent. Air taken in from
the room air intake is cooled by the evaporator
and then blown through the cool air supply.
I003158
Condenser Control Box
Evaporator
Evaporator
Fan Motor
Condenser
Fan Motor
I003153
Room
Air Intake
Cool Air
Supply
(Evaporator)
Condenser
Exhaust
Condenser Intake