Metro Mobile Computing Workstations MPS-4007 Lithium Ion Nano-Phosphate Power Supply - Manual (Page 41)

Metro TM MPS-4007 Li-Nano Power Supply Operations Manual Supplement, Doc. L01-505 41
InterMetro Industries Corporation
Maintenance and Storage
Cleaning
Use Metro Cleaner (foaming aerosol available from InterMetro
Customer Service), or an equivalent mild hospital disinfectant, to clean
the exposed surfaces of the Power Supply on a regular basis. Metro
Cleaner is compatible with all of the components of the Metro
TM Series
Mobile Computing Workstation.
• Dampen a soft cloth with Metro Cleaner or equivalent cleaner.
• Wipe surfaces until clean.
• Do not spray Metro Cleaner into any openings (like air vents or
fan on power supply) of the Power Supply.
• Do not use Metro Cleaner for medical devices used for patient
contact (EKG contacts, etc.).
Connecting the Power Supply Batteries
Notice: The following procedure for Connecting the Power Supply Batteries
applies only to Metro
TM Series Mobile Computing Workstation equipped
with the Li-Nano Power Supply (MPS-4007). The battery cells are not
connected during shipment due to USDOT and IATA regulations. The
procedure is required immediately after unpacking before powering up
and using the workstation for the first time.
Caution:
Only qualified service personnel should perform the following procedure
for Connecting the Power Supply Batteries.
Ensure Power
Supply is off • Ensure the AC cable is disconnected from the wall outlet.