Metro Mobile Computing Workstations MPS-4007 Lithium Ion Nano-Phosphate Power Supply - Manual (Page 26)

26 Metro TM MPS-4007 Li-Nano Power Supply Operations Manual Supplement
InterMetro Industries Corporation
Desktop Status Window Indications
Following are the indications and meanings of the Desktop Status Window.
Communications: Standby. Power supply and
workstation computer communications interrupted.
Symbol may appear very briefly when BatteryPro400
has just started while the power supply and computer
establish USB communications. The status should
change to next state below: if it does not, the USB
connection between the computer and power supply has
a problem. See “Troubleshooting” below.
Calculating. Power supply data loading.
When BatteryPro400 has just started it loads the data
from the power supply. The status should change to one
of the states shown following.
Charging. Power supply is plugged into AC power
source and is charging the batteries.
Green will scroll across the battery icon indicating that it
is charging.
Battery charge level is displayed as a percentage and,
based on the current equipment load, the calculated
remaining charge time.
Charged. Power supply is plugged into AC power
source and the batteries are fully charged.
Battery icon is a steady green.
Discharging. Power supply is not plugged into AC
power and is running on batteries.
Battery icon is steady green to the battery charge level.
Battery charge level is displayed as a percentage and,
based on the current equipment load, the calculated
remaining run time.