Metro Mobile Computing Workstations MPS-4007 Lithium Ion Nano-Phosphate Power Supply - Manual (Page 40)

40 Metro TM MPS-4007 Li-Nano Power Supply Operations Manual Supplement
InterMetro Industries Corporation
Software Installation
The BatteryPro400 software application installation file contains all drivers and applications for
BatteryPro400 operation.
Notice: Typically, the BatteryPro400 Mobile Computing Workstation Power Supply
Management software and drivers are installed at the factory and no additional
installation is required.
Notice: The software package should already be installed on the workstation computer before
plugging in the USB cable.
BatteryPro400 software packaged with the electronic version of this manual is available for
download from www.metro.com. Contact InterMetro Customer Service for additional details.
Application Installation
Run “Setup_BatteryPro400_Vxxx.exe” from the installation disk supplied or from the
downloaded file from www.metro.com. “xxx” in the file name is the release version number.
“Setup_BatteryPro400_Vxxx.exe” will automatically install the BatteryPro400 application.
USB HID Driver Installation
Plug in the USB cable to complete the installation of the required USB Human Interface Device
(HID) driver. Windows will detect the new device on the USB port and automatically perform the
“Found New Hardware” utility as shown below. Installation of the driver is automatic and
requires no user intervention. For additional details, contact InterMetro Customer Service.
USB HID Driver Installation
Windows will detect the new device on the USB
port and automatically perform the “Found New
Hardware” utility. No user actions should be
required.