Measurement Computing CIO-EXP-GP - Manual (Page 17)

4.8 Verifying the Installation
To verify the installation, use the InstaCal program installed on your computer. This software came with
your A/D board if you bought the board from the same manufacturer as the CIO-EXP-GP. If your A/D
board is not from the same manufacturer but is compatible, please call technical support and request a
copy of InstaCal.
Use InstaCal's TEST option to verify that a signal present at one of the CIO-EXP-GP inputs can be read.
When using an AC signal source, keep the frequency below 70Hz to avoid attenuation by the low pass
filter.
13