Measurement Computing eZ-Record rev.2.1 - Manual (Page 25)

25
January 2001 eZ-Record Manual
T
ASK
B
AR
Playback Controls
The Playback option appears on your main screen as a series of icons that
resemble and work like a VCR. The left arrows “backward playing” and the
right arrows “play.” The arrows with vertical lines “backward playing” and
“play” one frame at a time. The square stops play. Select Playback/Review
on the Task Menu to activate the Playback Controls
Record Button
This button is used to start recording. Select Measurement on the Task
Menu to activate the Record Button.
Scope Button
This button is used to start data acquisition. If averaging is being performed,
it changes to ACQUIRE after all measurements and averaging is complete.
Select Measurement on the Task Menu to activate the Scope button.
Signal Generator On/Off Button
Toggles the Signal Generator between on and off. The Signal Generator
button is only active when hardware is present.
Cursor Lock
The Cursor Padlock button toggles the cursor between a lock position and
free movement. If the Padlock is closed, cursors are synchronized in multiple
windows when they are of the same time domain, same frequency domain, or
same octave band data.
Export Button
Click this button to export data. Prior to using this button you must first set
up the condition for Exporting data in the Save Export Function Data window
access via the Export Menu.
Acquisition Status Panel
This icon indicates the acquisition status of the analyzer.
Waiting Trigger: A trigger has not been recognized, since the Acquire button
was clicked.
Triggered: Analyzer is capturing and processing data based on the setup
conditions.
Completed: Analyzer has finished processing the frame of data. The “Averages
Count” increments by 1 at this time.
Analyzer Status Message Area
The analyzer status is displayed in this area. Messages you may see are
Armed, Waiting Trigger, Triggered, Completed, Stopped, Double Hammer
Rejected, Overload Rejected, Exporting Function Data.