Measurement Computing PCI-DAS6071 - Manual (Page 14)

PCI-DAS6071 User's Guide Installing the PCI-DAS6071
14
DAQ-sync connector pinout (view from top)
Signal Name Pin Pin Signal Name
DS A/D START TRIGGER 1 ■ ■ 2 GND
DS A/D STOP TRIGGER 3 ■ ■ 4 GND
DS A/D CONVERT 5 ■ ■ 6 GND
DS D/A UPDATE 7 ■ ■ 8 GND
DS D/A START TRIGGER 9 ■ ■ 10 GND
RESERVED 11 ■ ■ 12 GND
SYNC CLK 13 ■ ■ 14 GND
Figure 3. CDS-14-3 cable
Details on the CDS-14-x cable are available on our web site at
www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=104&pf_id=1528 .
Field wiring, signal termination and conditioning
Screw terminal boards and BNC adapters
Use with the C100HD50-x cable:
 CIO-MINI50: 50-pin universal screw terminal accessory.
 CIO-TERM100: 16x4 screw terminal.
 SCB-50: 50 conductor, shielded signal connection/screw terminal box provides two independent 50-pin
connections.
Use with the C100MMS-x cable:
 SCB-100: 100 conductor, shielded signal connection/screw terminal box provides two independent 50-pin
connections.
BNC connector boxes :
 BNC-16SE: 16-channel single-ended BNC connector box.
 BNC-16DI: Eight-channel differential BNC connector box.
Details on these products are available on our web site at www.mccdaq.com/products/screw_terminal_bnc.aspx .
ISO-5B module racks
Use with the C100HD50-x cable:
 ISO-RACK16/P: 16-channel isolation module mounting rack.
 ISO-DA02/P: Two-channel, 5B module rack.
Details on these products are available on our web site at www.mccdaq.com/products/signal_conditioning.aspx .