Measurement Computing CB-7000 DIO - Manual (Page 51)

51
CB-7000 DIO Manual
2.21 ~AA3EVV
Description: Set Host Watchdog Timeout Value
Command: ~AA3EVV[CHK](cr)
~ Delimiter character
AA Address of setting module (00 to FF)
3 Command for set host watchdog timeout value
E 1 = Enable, 0 = Disable host watchdog
VV Timeout value, from 01 to FF, each for 0.1 second
Response: Valid Command: !AA[CHK](cr)
Invalid Command: ?AA[CHK](cr)
Syntax or communication error may get no response.
! Delimiter for valid Command
? Delimiter for invalid Command
AA Address of response module (00 to FF)
Example:
Command: ~010 Receive: !0100
Read Address 01 module status, return host watchdog timeout
status is clear.
Command: ~013164 Receive: !01
Set Address 01 host watchdog timeout value 10.0 seconds and
enable host watchdog, return successful.
Command: ~012 Receive: !01164
Read Address 01 host watchdog timeout value; return that host
watchdog is enabled, and time interval is 10.0 seconds.
Command: ~** No response