Legrand 881AMD8TC - Manual (Page 3)

3
Extron ® Device
(Not Supplied)
Activate Cat 5e 2A Jack
(Sold Separately)
Activate Bezel
(Supplied)
Extron Device Bezel
(Supplied)
Extron ® Device Bezel –
Supplied with AV3CTC.
(Extron ® Devices Sold Separately Through
Extron ® Distributors Only)
Pass & Seymour ACTIVATE Bezel &
CM Modules – Supplied with AV3CTC
NOTE: This Bezel Accommodates (1) Single and (1)
Double or (3) Single MAAPs (Mini Architectural
Adapter Plates) Extron
® Devices.
Activate Cat 5e Jack
Activate Bezel
Pass & Seymour Activate Bezel &
CM Modules
Ortronics Series II Jack
(Sold Separately)
Ortronics Series II Bezel
Ortronics Series II Bezel
Ortronics TracJack
(Sold Separately)
Ortronics TracJack Bezel
Ortronics TracJack Bezel &
Communication Jack
881RC4 COVER INSTALLATION:
3. Connect receptacle leads to circuit
conductors with twist-on wire
connectors or other approved methods.
WARNING: Receptacle mounting means not grounded.
Grounding wire connection required. For
isolated ground wiring, connect ground
leads to a separate isolated grounding
conductor (see NEC 250-146(d)).
1. Cut a 6 1/2" [165mm] circular
concentric opening in the floor
covering.
2. Remove the slide cover and gasket
to access the communications
compartments.