Legrand 881AMD8TC User Manual
Page 2
2
4. Pull the communications cables
through the cover. Route cable
around the receptacle shell for
devices opposite the communications
compartment.
5. Orient the open side of the cover
adapter with the divided side of the
box and push into place – No glue
required!
7. Align gasket over receptacle and press bead into flange
channel. Reattach slide cover with two #6 screws.
CAUTION:
Gasket must be set
in place to provide
scrub water seal.
CAUTION: Gasket must be
set in place to
provide scrub
water seal.
NOTE: For Isolated ground
applications, apply
IG icon on receptacle
slide as shown.
CAUTION:
Receptacle supplied with this activation is not suitable for direct field wiring.
Contact manufacturer for replacement. Field modifications will void UL Listing.
Replacement receptacle is limited to this manufacturer’s catalog No. RC37REC.
Align gasket over
communications opening
and press bead into
flange channel.
Slide Cover Mounting
Screws (2) #6-32
881CTC Series
881AV3CTC Series
6. Wire and snap communication jacks into flange.
881AMD8TC Series