Datamax 123 Print v1.1x - Manual (Page 77)

Copyright © 2007 • MCL Technologies • All Rights Reserved
www
.mcl-collection.com
Chapter 3 : Creating a Project
3.3.2.5. Select Value from List
General introduction
As discussed in
Section 3.3.2 – Variables, Input Methods , several
input methods are available for your screen prompts.
This section discusses the Select Value from List input method and
the properties you need to set up when you select this input type.
Select Value From List allows the User to select the input value from
a predefined list of values or from existing variables.
For Select Value From List the property settings are as follows:
Variable/Value selection
Result Variable
Create the list from which the user will
choose the desired input. Create the
list by typing entries directly in the
property table provided. Alternatively,
select existing variables to create the
list. To select a variable, click the
variables icon beside the table
entry and select the desired variable
from the Variables list box.
Select the variable in which the user
input should be stored
Following is an example to illustrate the use of some of the options
described above.
October 2007 Page 77