Datamax 123 Print v1.1x - Manual (Page 208)

Copyright © 2007 • MCL Technologies • All Rights Reserved
www
.mcl-collection.com
Chapter 7 : Deploying a Printer Project
7.5. Load Project
General introduction This section describes how to download your currently active project
into your printer using the Load Project function.
For quick project load into your printer during application development,
123 Print provides a Load Project function. Using this function, 123 Print
loads the open project onto the connected printer. You must have a
project open for this function to work. On the 123 Print main window
menu bar:
1 Click File
2 Click Open
3 Select the project that is to be loaded into the printer
On the 123 Print main window toolbar click the Load Project icon,
or on the menu bar:
4 Click Tools
5 Click Load Project
You are prompted to confirm that you want to load the project as
shown here
6 Click Yes
A dialogue box displays the progression status of the loading process as
shown here
An Info dialogue box indicates that the download completed
successfully.
October 2007 Page 208