System setup, General introduction, Setup – Datamax 123 Print v1.1x User Manual
Page 110: Text display, Graphical display
Copyright © 2007 • MCL Technologies • All Rights Reserved
www
.mcl-collection.com
Chapter 3 : Creating a Project
3.5. System Setup
General introduction
This section describes the settings for your 123 Print project.
Different settings are possible according to your printer display type.
Setup
To enter System Setup, you must first have a project open. Then,
Click the System Setup button
on the left-hand
side of the main window or on the menu bar:
1
Click Project
2
Click System Setup
Text Display
When you select System Setup for a text display printer, the Aux Com
Settings window is displayed as shown here. These are the only project
related settings for a text display printer project. See Section 3.5.2 –
Auxiliary Communications for Aux Com Settings setup.
Graphical Display
When you select System Setup for a graphical display printer, the
System Settings window is displayed as shown here. Notice that there
are also buttons for Soft Keys setup and Aux Com setup. See
Section 3.5.2 - Auxiliary Communications
.
October 2007
Page
110