Auxiliary communications, General introduction, Setup – Datamax 123 Print v1.1x User Manual
Page 116: System setup, Section 3.5.2 - auxiliary communications
Copyright © 2007 • MCL Technologies • All Rights Reserved
www
.mcl-collection.com
Chapter 3 : Creating a Project
3.5.2.
Auxiliary Communications
General introduction
This section describes the auxiliary communications settings in order for
your 123 Print project to be able to communication with peripherals
connected serially to your Datamax printer.
Setup
To enter auxiliary communications setup, you must first have a project
open. Then,
Click the System Setup button
on the left-hand
side of the main window or on the menu bar:
1
Click Project
2
Click System Setup
If using a graphical display printer, on the System Settings screen:
3
Click the Aux Com
button
The Aux Com Settings window is displayed as shown here
Com 1 is the default port for barcode scanning.
Type allows you to define how you want the scanned data to be saved
in the buffer for your 123 Print application
4
Choose the appropriate type from the drop down list as shown
below
October 2007
Page
116