Datamax 123 Print v1.1x - Manual (Page 191)

Copyright © 2007 • MCL Technologies • All Rights Reserved
www
.mcl-collection.com
Chapter 7 : Deploying a Printer Project
Control execution If 123 Print does not require any additional information to perform the
operation, it initiates the control action immediately when you select it.
If the operation is not successful, you are notified of the failure, as
shown below. If this occurs, take corrective action to solve the problem
and try again. Please see
Section 7.1 – Connect/Disconnect Printer for
more information.
Following is a more detailed description about each control and how to
execute it.
Feed Label 1 Click to perform a form feed and advance the label roll to the
top of the next label
Pause Printer This is a toggle function that operates in the same way as the PAUSE
button on your printer.
1 Click once to pause the printer
2 Click a second time to resume printer operation from the point
of interruption
Cancel Printing This control operates in the same way as the STOP/CANCEL button on
your printer.
1 Click to abort the current print job and clear the current label
format from the printer buffer
2 Click to resume printer operation
October 2007 Page 191