Download process – Datamax 123 Print v1.1x User Manual
Page 196
Copyright © 2007 • MCL Technologies • All Rights Reserved
www
.mcl-collection.com
Chapter 7 : Deploying a Printer Project
Download Process
123 Print performs the following steps for you if you load the MCL
System Menu into the printer when you are loading firmware:
Loads the selected firmware
Reboots the printer
Waits for the printer to boot up and restore its settings (normally
about 40 seconds)
Loads the selected MCL System Menu
Note: It is advisable to shut down any applications, such as AppleTalk,
before downloading new firmware. These applications can affect the
printer reboot time.
October 2007
Page
196