K-Patents PR-01-S - Manual (Page 96)

INSTRUCTION MANUAL FOR K-PATENTS PR-01-S (-AX/FM/CS) DOCUMENT/REVISION No. INM 1/14
Effective: May 15, 2009
94
11.3. RETRACTOR WITH ISOLATION VALVE PARTS LIST
Figure 11.31 HIMP-2-CR retractor and isolation valve
Item Pcs. Part No. Description Item Pcs. Part No. Description
1.* 1 Sensor assembly 16. 2 PR-3302 Check valve
PR-7710 Sensor wetted parts for LPH 57 17. 1 Tee R1/2 AISI 316
PR-7711 Sensor wetted parts for LPH 50 18. 1 Elbow R1/4 AISI 316
PR-7712 Sensor wetted parts for LPH 57 SAF 2205 19. 2 Pipe connector 8 mm
PR-7729 Sensor wetted parts for LPH 50 SAF 2205 20. 1 Hexagon nipple R1/4 AISI 316
2.* 2 PR-3520 Valve gable assembly AISI 316L 21.* 1 Lock plate and safety bar assembly
2.* 2 PR-3521 Valve gable assembly SS2377/SAF 2205 22.* 1 -CR Crank for retraction HIMP-2
3.* 1 Box assembly 23. 1 Box tightening ring
4.* 1 Yoke for bars assembly 24. 1 PR-3505 Sandvik O-ring FCLG-T-88.9x3.6 Teflon®
5.* 1 Valve handle assembly 25. 1 Ball
6. 3 Spacer 26.* 1 PR-3510 Body seal set for ball valve
7. 4 Bolts and nuts 27. 1 Stem
8. 1 Ball valve DN65 Taco FB 2566 28. 3 Stem seal and follower
9. 1 Sensor PR-01-S-LPH 29. 1 Stop plate
10. 1 PR-3503 Sandvik clamp FCLC-316L-88.9-S-T PN25 30. 1 Stem retaining nut
11. 1 PR-3509 Box packing set Chesterton 172 31. 1 Securing nut
12. 4 Nut M1 DIN 934 32. 1 Force nut
13. 1 Nipple 33. 1 PR-3530 Belt
14. 1 Pipe 34. 1 PR-1009 HIMP-2 nozzle cleaning tool
15. 3 Ball valve R1/4
1 PR-3511 HIMP-2 upgrade kit:
Note. * = Assembly Items 4./21./31. x 2/32./5.