K-Patents PR-01-S - Manual (Page 84)

INSTRUCTION MANUAL FOR K-PATENTS PR-01-S (-AX/FM/CS) DOCUMENT/REVISION No. INM 1/14
Effective: May 15, 2009
82
8.5. RECOMMENDED WASH PRESSURES AND TIMES
To select a recommended wash pressure use the following table:
Nozzle type
Integral nozzles
Wash medium Wash time
seconds
Minimum above
process pressure Maximum above
process pressure
- HPS steam 2-3 2 bar (30 psi) 6 bar (85 psi)
- HPN pressure water 10-15 30 bar (450 psi) 70 bar (1000 psi)
HIMP-2 steam 3-5 2 bar (60 psi) 6 bar (85 psi)
HIMP-3 water 10-15 30 bar (450 psi) 70 bar (1000 psi)
Flow cell nozzles
PR-3356 / WP pressure water 10-15 30 bar (450 psi) 70 bar (1000 psi)
PR-3355 / SN steam 3 2 bar (30 psi) 4 bar (70 psi)
PR-3354 / WN water 10 2 bar (30 psi) 4 bar (70 psi)
Table 8.50 Recommended wash pressures and times.
Note. Steam wash: Do not use longer wash times than is recommended in the Table 8.50. In case of
coating adjust the wash interval.