Kawai ATX2/ATX2-f - Manual (Page 97)

97
Set
tings
5
. Multi-timbral Mode
The Multi-timbral Mode setting determines whether or not the AnyTimeX2 piano is able to receive MIDI information
on more than one MIDI channel simultaneously. This allows the instrument to play back multi-track, multi-timbral
performance data sent from an external MIDI device.
 Multi-timbral Mode setting
Multi-timbral Mode Selected sound
Off (default) The sound shown in the left column is selected*.
On1 The sound shown in the left column is selected*.
On2 The sound shown in the right column is selected*.
* Please refer to the ‘Program Change Number List’ on page 115.
1. Selecting the Multi-timbral Mode setting
After entering the MIDI Settings menu (page 92):
Press the  or  buttons to select the Multi-timbral Mode
setting.
2. Changing the Multi-timbral Mode setting
Press the  or  buttons to change turn the Multi-timbral
Mode setting.
* To reset the Multi-timbral Mode setting to the default setting, press
the FUNCTION button (RESET).
* Any changes made to the Multi-timbral Mode setting will remain until
the power is turned off .
3. Exiting the Multi-timbral Mode setting
Press the FUNCTION button (BACK) to exit the Multi-timbral
Mode setting and return to the Function Menus screen.