Split mode, Entering split mode – Kawai ATX2/ATX2-f User Manual
Page 19
19
P
la
y
ing t
h
e P
iano
Split Mode
The Split Mode function divides the keyboard into two sections, allowing each section to be played with a diff erent
sound. For example, a bass sound in the lower section, and a piano sound in the upper section.
1. Entering Split mode
Press the FUNCTION button (SPLIT).
The Split Mode screen will be shown in the LCD display.
* The default split point is set between keys B3 and C4.
The upper section and lower section sound names will be
shown in the LCD display. The LED indicator for the upper
section sound button will turn on, and the LED indicator for the
lower section sound button will start to fl ash.
Lower
section
sound
Upper
section
sound
* By default, the lower section will be set to the ‘Wood Bass’ sound.
2a. Changing the upper/lower section sounds: Method 1
Press the
or buttons to move the selection cursor over the
upper section or lower section sound.
Press the
or buttons to cycle through the diff erent sound
variations.
2b. Changing the upper/lower section sounds: Method 2
It is also possible to change the upper/lower section sound by pressing the PIANO or OTHERS buttons.
To select a diff erent sound for the upper section:
Press the PIANO or OTHERS buttons repeatedly.
or
To select a diff erent sound for the lower section:
Press and hold the FUNCTION button, then press the PIANO
or OTHERS buttons repeatedly.
or
ho
ld
hold
buttons:
Move selection cursor.
buttons:
Change sound variation.
LED indicator fl ashing:
Lower section sound.
LED indicator on:
Upper section sound.