Damper noise – Kawai ATX2/ATX2-f User Manual
Page 75
75
Set
tings
4
. Damper Noise
When the damper pedal of an acoustic piano is pressed and released, it is often possible to hear the sound of the
damper head touching and releasing the strings.
The AnyTimeX2 piano reproduces this sound, with the Damper Noise setting allowing the volume of this sound to
be adjusted.
* This Virtual Technician setting will aff ect acoustic piano sounds only.
1. Selecting the Damper Noise setting
After entering the Virtual Technician menu (page 70):
Press the
or buttons to select the Damper Noise setting.
2. Adjusting the Damper Noise volume
Press the
or buttons to increase or decrease the volume of
the Damper Noise setting.
* The Damper Noise volume be adjusted within the range of
Off , 1 - 10, with higher values resulting in a louder eff ect.
* To reset the Damper Noise setting to the default value, press the
FUNCTION button (RESET).
* Any changes made to the Damper Noise setting will remain until the
power is turned off .
3. Exiting the Damper Noise setting
Press the FUNCTION button (BACK) to exit the Damper Noise
setting and return to the Function Menus screen.