Kawai ATX2/ATX2-f - Manual (Page 47)

47
Re
corde
r
2. Selecting an audio fi le
Press the  or  buttons to move the selection cursor, then
press the FUNCTION button (SELECT) to select the audio fi le.
The audio play screen will be shown in the LCD display.
3. Playing the selected audio fi le
Press the PLAY/STOP button.
The selected audio fi le will start to play, and information about
the fi le will be shown in the LCD display.
Audio fi le,
artist/song
Playback
volume
Playing
position
 Controlling audio fi le playback
While the audio fi le is playing:
Press the PLAY/STOP button to pause and resume playback.
Press the  or  buttons to rewind or advance the playing
position of the audio fi le.
Press the  or  buttons to adjust the playback volume of the
audio fi le.
* The playback volume can be adjusted within the range of 1 - 100.
Press the FUNCTION button (A-B) twice to set the start and
end points of the A-B loop.
* Pressing the A-B button for a third time will turn off the loop.
 USB Recorder Edit menu
The USB Recorder Edit menu allows the playback mode (Single, 1-Repeat, All-Repeat, Random) to be changed, and the pitch of the keyboard
to be transposed in semi-tone steps. Please refer to page 50 for more information.
 Overdub function
The Overdub function allows the sound of the AnyTimeX2 to be recorded (overdubbed) to an existing MP3 or WAV audio fi le.
Please refer to page 52 for more information.
4. Exiting USB playback mode
Press the FUNCTION button (BACK) to exit USB playback
mode and return to normal operation.
* If the selected audio fi le contains embedded metadata (e.g. ID3 tags)
such as artist name and song title, this information will be also be
shown beside the fi lename.
 buttons:
Adjust playback volume.
 buttons:
Rewind/advance playing position.
* There may be a noticeable diff erence in volume between audio fi le
playback and the AnyTimeX2 keyboard sound. When playing back
audio data, please adjust the volume of the audio fi le as desired.