User tuning, Virtual technician settings, Set tings – Kawai ATX2/ATX2-f User Manual
Page 84: Exiting the user tuning function
84
Set
tings
Virtual Technician Settings
User Tuning
The User Tuning function allows each of the 88-keys to be tuned individually.
1. Selecting the User Tuning memory
After selecting the Stretch Tuning setting (page 83):
Press the
or buttons to select one of the User Tuning
memories.
* Up to four diff erent User Tuning memories can be created and stored.
Press the FUNCTION button (EDIT).
The User Tuning screen will be shown in the LCD display.
2. Selecting the note, adjusting the user tuning value
Press the
or buttons to select the desired note to be
adjusted.
* To select a note directly, press and hold the FUNCTION button
(+ KEY) then press the desired key.
Press the
or buttons to adjust the user tuning value for the
selected note.
* The User Tuning value can be adjusted within the range of –50 - +50.
* To reset the User Tuning setting to the default value, press the
FUNCTION button (RESET).
* Any changes made to the User Tuning setting will remain until the
power is turned off .
3. Exiting the User Tuning function
Press the FUNCTION button (BACK) to exit the User Tuning
tuning screen and return to the Stretch Tuning setting.