Kawai ATX2/ATX2-f - Manual (Page 79)

79
Set
tings
8
. Hammer Delay
When playing pianissimo passages using an acoustic piano, there may be a perceived delay between a key being
pressed and the hammer striking the strings.
If desired, the AnyTimeX2 piano can recreate this delay, with the Hammer Delay setting allowing the delay length
to be adjusted.
* This Virtual Technician setting will aff ect acoustic piano sounds only.
1. Selecting the Hammer Delay setting
After entering the Virtual Technician menu (page 70):
Press the  or  buttons to select the Hammer Delay setting.
2. Adjusting the Hammer Delay value
Press the  or  buttons to increase or decrease the value of
the Hammer Delay setting.
* The Hammer Delay value can be adjusted within the range of
Off , 1 - 10, with higher values resulting in an increased delay.
* To reset the Hammer Delay setting to the default value, press the
FUNCTION button (RESET).
* Any changes made to the Hammer Delay setting will remain until the
power is turned off .
3. Exiting the Hammer Delay setting
Press the FUNCTION button (BACK) to exit the Hammer Delay
setting and return to the Function Menus screen.