String resonance, Virtual technician settings, Set tings – Kawai ATX2/ATX2-f User Manual
Page 76: Demonstrating string resonance, Selecting the string resonance setting, Adjusting the string resonance volume, Exiting the string resonance setting
76
Set
tings
Virtual Technician Settings
5
. String Resonance
String Resonance refers to a phenomenon that exists in acoustic pianos whereby the strings of held notes resonate
‘sympathetically’ with other notes of the same harmonic series.
The AnyTimeX2 piano recreates this phenomenon, with the String Resonance setting allowing the volume of this
resonance to be adjusted.
* This Virtual Technician setting will aff ect acoustic piano sounds only.
Demonstrating String Resonance
To experience the string resonance phenomenon, gently hold down the ‘C’ key as shown in the illustration below, then press any of
the keys marked with a
symbol. In addition to the sound of each note played, it should also be possible to hear the strings of the
fi rst ‘C’ key resonating ‘sympathetically’, thus demonstrating String Resonance.
F G
C
B
F G
C
G
C
E
G
C D E
G
C
C
A
A
ho
ld
hold
1. Selecting the String Resonance setting
After entering the Virtual Technician menu (page 70):
Press the
or buttons to select the String Resonance
setting.
2. Adjusting the String Resonance volume
Press the
or buttons to increase or decrease the volume of
the String Resonance setting.
* The String Resonance volume be adjusted within the range of
Off , 1 - 10, with higher values resulting in a louder eff ect.
* To reset the String Resonance setting to the default value, press the
FUNCTION button (RESET).
* Any changes made to the String Resonance setting will remain until
the power is turned off .
3. Exiting the String Resonance setting
Press the FUNCTION button (BACK) to exit the String
Resonance setting and return to the Function Menus screen.