Erasing a part/song, Song recorder, Re corde r – Kawai ATX2/ATX2-f User Manual
Page 42: Selecting the erase function, Selecting the song/part to be erased, Erasing the selected song/part
42
Re
corde
r
Song Recorder
(Internal Memory)
4
. Erasing a part/song
This function is used to erase recorder parts that may have been recorded incorrectly or songs that are no longer
listened to. Once a part/song has been erased from memory it cannot be recovered.
1. Selecting the Erase function
After entering the Internal Recorder menu (see page 41):
Press the
or buttons to move the selection cursor over the
Erase function.
Press the FUNCTION button (ENTER) to select the Erase
function.
2. Selecting the song/part to be erased
Press the
or buttons to move the selection cursor over the
song memory or part.
Press the
or buttons to change the selected song memory
(1-10) or part (1, 2, or 1&2) to be erased.
If a part has already been recorded, a
*
symbol will be shown.
3. Erasing the selected song/part
Press the FUNCTION button (OK) to Erase the selected song
and part.
A confi rmation message will be shown in the LCD display,
prompting to confi rm or cancel the erase operation.
Press the FUNCTION button (YES) to confi rm the erase
operation, or the FUNCTION button (NO) to cancel.
Erasing all recorder songs from memory
Press and hold the PLAY/STOP and REC buttons, then turn the
instrument’s power off /on.
All recorder songs stored in memory will be erased.
buttons:
Move selection cursor.
buttons:
Move selection cursor.
buttons:
Select song memory/part.
YES: Erase
NO: Cancel
ho
ld
hold
ho
ld
hold