Fall-back noise, Virtual technician settings – Kawai ATX2/ATX2-f User Manual
Page 78
78
Set
tings
Virtual Technician Settings
7
. Fall-back Noise
When playing an acoustic piano, it is often possible to hear the faint sound of the keyboard action returning (i.e.
‘falling back’) to the neutral position after a key is released.
The AnyTimeX2 piano reproduces this sound, with the Fall-back Noise setting allowing the volume of this sound to
be adjusted.
* This Virtual Technician setting will aff ect acoustic piano and harpsichord sounds.
1. Selecting the Fall-back Noise setting
After entering the Virtual Technician menu (page 70):
Press the
or buttons to select the Fall-back Noise setting.
2. Adjusting the Fall-back Noise volume
Press the
or buttons to increase or decrease the volume of
the Fall-back Noise setting.
* The Fall-back Noise volume be adjusted within the range of
Off , 1 - 10, with higher values resulting in a louder eff ect.
* To reset the Fall-back Noise setting to the default value, press the
FUNCTION button (RESET).
* Any changes made to the Fall-back Noise setting will remain until the
power is turned off .
3. Exiting the Fall-back Noise setting
Press the FUNCTION button (BACK) to exit the Fall-back Noise
setting and return to the Function Menus screen.