Four hands mode, Entering four hands mode – Kawai ATX2/ATX2-f User Manual
Page 21
21
P
la
y
ing t
h
e P
iano
Four Hands Mode
The Four Hands Mode function divides the keyboard into two sections in a similar way to that of the Split Mode
function. However, with Four Hands Mode enabled, the octave/pitch of each section is automatically adjusted to
create two separate 44-key instruments with the same playing range. Furthermore, the damper (right) pedal and
soft (left) pedal act as separate damper pedals for the respective upper and lower sections, allowing two people to
perform piano duets using a single instrument.
1. Entering Four Hands mode
Press the FUNCTION button (SPLIT) once to enter Split Mode,
then press the FUNCTION button (4HAND) again to select
Four Hands Mode.
* The default four hands mode split point is set between keys E4 and
F4.
The Four Hands Mode screen and right/left section sound
names will be shown in the LCD display.
Left
section
sound
Right
section
sound
2a. Changing the right/left section sounds: Method 1
Press the
or buttons to move the selection cursor over the
right section or left section sound.
Press the
or buttons to cycle through the diff erent sound
variations.
2b. Changing the right/left section sounds: Method 2
It is also possible to change the right/left section sound by pressing the PIANO or OTHERS buttons.
To select a diff erent sound for the right section:
Press the PIANO or OTHERS buttons repeatedly.
or
To select a diff erent sound for the left section:
Press and hold the FUNCTION button (SPLIT), then press the
PIANO or OTHERS buttons repeatedly.
or
ho
ld
hold
buttons:
Move selection cursor.
buttons:
Change sound variation.
* By default, the right and left sections will both be set to the ‘Concert
Grand’ sound.