IHSE USA 482 Series Draco vario Dual- Head - Manual (Page 48)

Draco KVM Extender
48
2013-12-06
6 Operation
Pos: 61 /806-IHSE/Betrieb/Laden von DDC-Informationen/482-xx @ 10\mod_1385651419259_6.doc @ 103206 @ 2 @ 1
6.1 Download of DDC Information
By default, data from the internal DDC list is reported to the source
(computer, CPU). If these settings do not lead to a satisfying result, the
DDC information of the console monitor can be downloaded and stored
internally. The devices have to be configured accordingly (see
Chapter 5.2, Page 41).
On all KVM Extenders with USB-HID support, the user can load the DDC
information of the console monitor via keyboard command under operating
conditions.
1. Enter Command Mode with the 'Hot Key' (see Chapter 5.3, Page 42).
2. Press the key to download the DDC information of the console
monitor.
The screen goes black for a short time.
At the same time Command Mode is closed and the keyboard LEDs
return to previous status.
The video mode has been readjusted. Screen quality should be
optimal. The CPU should now show the console monitor as the
current screen, together with the available video resolutions.
The DDC information of the console monitor was loaded once.
Reloading is possible by repeating the operation.
When transmitting the DDC information at Dual-Head extenders, the
respective DDC lists will be stored for both connected monitors into the
CPU Unit. The process is performed for both monitors simultaneously.
Pos: 62 /806-IHSE/Betrieb/Parallelbetrieb/474-xx_Parallelbedienung redundanter CPU Units @ 9\mod_1373962269987_6.doc @ 77387 @ 2 @ 1