Hypertherm MAX200 Machine Torch Plasma Arc Cutting System - Manual (Page 59)

MAX200 Instruction Manual 3-35
14
SETUP
LEGEND – POWER SUPPLY END – 1X3 LEGEND – IHS END
PIN COLOR FUNCTION SOCKET COLOR FUNCTION
1 Red IHS Complete Sig. 1 Red IHS Complete Sig
2 Grn Upper Limit Sw. Sig. 2 Grn Upper Limit Sw. Sig
3 3 Blk Upper Limit Sw. Com
4 Blk IHS Complete Com 4 Blk IHS Complete Com
5 Blk Upper Limit Sw Com 5 Drain Shield – Grn/Blk
6 6
7 Drain Shield – Wht/Blk 7 Key
8 Drain Shield – Red/Blk 8 Wht AC Power
9 Drain Shield – Grn/Blk 9 Blk AC Power
10
11 Blk AC Power
12
13
14 Wht AC Power
Part No. Length
023111 25 ft (7.6 m)
023112 50 ft (15 m)
023155 75 ft (23 m)
023113 100 ft (30.5 m)
023114 150 ft (46 m)
023284 200 ft (61 m)
Figure 3-16 MAX200 to IHS Interface Cable
Indicates Pairs.
NOTE: On IHS End, Cut Red/Black Shield
& White/Black Shield Wires
008176 Pin (9)
008190 Key
047002 Cable, 22–3 Pr Shielded
Belden #8777
Insert Key In Face Of Plug
Tapered End First Until
It “Locks” In Detent
008186
Socket (7)
008187 Strain Relief
008192 Strain Relief
008202 Plug, Shell 17–14
008185 Plug, Shell 13–9
Power Supply End
1X3 IHS End