Hypertherm MAX200 Machine Torch Plasma Arc Cutting System - Manual (Page 27)

MAX200 Instruction Manual 2-3
14
SPECIFICATIONS
Dimensions:
Width ....................................................................28-1/4" (71 cm)
Height ...................................................................35-1/2" (90 cm) w/o casters
43" (109 cm) w/casters
Depth....................................................................41-1/4" (104 cm) w/o handle
50" (127 cm) w/handle
Weight ..................................................................780 pounds
Cooling ................................................................Forced Air (Class F)
* * MAX200 Power Supply – Machine Torch w/o THC Configuration
** MAX200 Power Supply – Machine Torch w/THC Configuration
Gas Requirements:
Gas Type/Quality..................................................Air (compressed)/clean, dry, oil-free
Oxygen (liquid)/99.5%
Nitrogen (liquid)/99.995%
Carbon Dioxide (compressed or liquid)/ 99.5%
Plasma Gases ......................................................Air, Oxygen (O
2
), Nitrogen (N
2
),
Argon/Hydrogen (H35 = 35% Hydrogen/65% Argon)
Shield Gases ........................................................Air, Carbon Dioxide (CO
2
), Nitrogen (N
2
)
Plasma Gas Flow .................................................66 scfh (Air), 60 scfh (N
2
), 70 scfh (H35), 72 scfh (O
2
)
Shield Gas Flow ...................................................220 scfh (CO
2
), 280 scfh (Air), 290 scfh (N
2
)
Plasma Gas Inlet Pressure ..................................90/120 psi dynamic (flowing)
Shield Gas Inlet Pressure ....................................90 psi dynamic (flowing)
Plasma Gas Pressure (Test/Run).........................13/48, 22/48 psi (Air); 13/44, 15/48 psi (O
2
); 15/35,
17/37 psi (N
2
); 23/56 psi (H35)
Shield Gas Pressure ............................................70 psi
Torch Coolant Tank Capacity ............................2.9 gallons (11 liters); refer to Section 3, Torch Coolant
System, for coolant specifications, warning, and cautions
CE Power Supplies
The specifications specific to the 400V CE, 3 Ph, 50 Hz power supplies (073200 and 073213) are listed
below. These CE power supplies conform to all other non CE power suppy specifictions as listed above.
Refer to Appendix D for EMC requirements, power cable connections, and parts information specific to the
MAX200 CE power supplies.
Input Power (Input Voltage (U
1
) x Input Current (I
1
)):
# 073200 (without THC) .......................................400 VAC, 3Ø, 50 Hz, 56 amps
# 073213 (with THC) ............................................400 VAC, 3Ø, 50 Hz, 56 amps
Dimensions:
Height ...................................................................40-3/4" (104 cm) w/o casters
48-1/4" (122 cm) w/casters
Weight ..................................................................800 pounds (363 kg)