Hypertherm MAX200 Machine Torch Plasma Arc Cutting System - Manual (Page 31)

MAX200 Instruction Manual 3-3
14
SETUP
Claims and Technical Questions
Claims for damage during shipment – If your unit was damaged during shipment, you must file a claim with the
carrier. Hypertherm will furnish you with a copy of the bill of lading upon request.
Claims for defective merchandise – All units shipped from Hypertherm undergo rigorous quality control testing.
However, if your unit does not function correctly:
1. Read the Troubleshooting section of this manual. You may find the problem is quite easy to fix, such a loose
connection.
2. If you are unable to solve the problem, call your distributor. He will be able to help you, or refer you to an
authorized Hypertherm repair facility.
3. If you need additional assistance, call Technical Service listed in the front of this manual or your authorized
Hypertherm distributor.
Pre-Installation
Installation and service of the electrical and plumbing systems must conform to national or local electrical
and plumbing codes. Have this work performed only by qualified, licensed personnel.