3 – composition/information on ingredients, 4 – first aid measures, 5 – fire-fighting measures – Hypertherm HPR800XD Auto Gas Rev.2 User Manual
Page 329: 6 – accidental release measures, Hypertherm plasma systems, Warning
12/15/2010
Hypertherm
Plasma systems
a-3
Date
SAFETY DATA SHEET
Revision
6 Dec 2010
Torch Coolant 30% PG Mixture
2.01CLP
3 – coMPoSItIoN/INFoRMAtIoN oN INgREDIENtS
HAzARDoUS INgREDIENt 1
% w/w
cAS No.
Ec No.
Ec classification
Propylene Glycol
30-50
57-55-6
200-338-0
NoNE
gHS classification
Not classified
NoNE
HAzARDoUS INgREDIENt 2
% w/w
cAS No.
Ec No.
Ec classification
Benzotriazole
<1.0
95-14-7
202-394-1
Xn, F
gHS classification
wARNINg
Acute tox. 4 (oral, Dermal, Inhalation)
Eye Irrit. 2, Aquatic chronic 3
H302, 312, 319, 332, 412
For full text of R phrases see section 16. For full text of H/P phrases see section 16. Non-hazardous components are not listed.
4 – FIRSt AID MEASURES
Inhalation
Unlikely to be hazardous by inhalation unless present as an aerosol.
Remove patient from exposure.
Skin contact
Wash skin with water.
Eye contact
If substance has gotten into the eyes, immediately wash out with plenty of water for
several minutes.
Ingestion
Laxative. Do not induce vomiting. If swallowed, seek medical advice immediately and
show this container or label.
Further Medical treatment
Unlikely to be required but if necessary treat symptomatically.
5 – FIRE-FIgHtINg MEASURES
Combustible but not readily ignited.
Extinguishing media
Extinguish preferably with dry chemical, foam or water spray
Unsuitable Extinguishing Media
None known
Fire Fighting Protective Equipment A self contained breathing apparatus and suitable protective clothing should be worn in
fire conditions
6 – AccIDENtAl RElEASE MEASURES
Personal Precautions
Put on protective clothing
Environmental Exposure controls
Absorb spillages onto sand, earth or any suitable adsorbent material
other
None