Harken 7415.15S MKIV Hydraulic Jib Reefing & Furling - Manual (Page 29)

MKIV Hydraulic Unit 5 29
Operation Manual Operation
Before using the system, practice manual operation in case there is a loss of power. Make sure that the emergency
handle can rotate and not hit the bow pulpit.
Cordless drill adapters work well, but there must be a fully-charged cordless drill on hand at all times. Because
a cordless drill may lose power, always have an emergency handle onboard in a secure, easy-to-find location.
Communicate location as part of safety equipment orientation for all crewmembers.
1. Communicate to all crewmembers that you are going
to manually rotate the furler. Practice this emergency
procedure in controlled conditions so you and your
crew are prepared in the event of a power failure.
Explain procedure for controlling the boat and have
someone ease sheets as you rotate the handle.
2. Have an emergency handle available.
3. Using all personal safety precautions including PFD,
harness, and tether, go forward.
4. Position shift lever on right side as shown in photo.
5. Use the emergency handle or a cordless drill to turn
the foil until the sail is reefed or furled.
WARNING! You must have a reliable
manual drive procedure in place before
using the system.
WARNING! You must observe all personal safety
precautions including using a harness and
secure tether and personal flotation device
(PFD) when going forward.
Furling or Reefing with Manual Power
In the event of power failure, it is necessary to go
forward and lower sail or furl by hand.
Emergency
Handle
Drill Adapter for
Manual Drive