Harken 7412.13 12V MKIV Electric Jib Reefing & Furling - Manual (Page 23)

Assembly Attach Turnbuckle/Toggle
Assemble turnbuckle.
Note: If using Sta-Lok
® or Norseman ®
stud, you must use a washer above
stud as shown below.
MKIV Unit 2E, 3E 23
Connect eye to toggle jaw using special
clevis pin. Secure using cotter pin.
If stay length is set use side cutters or
needle-nose pliers to bend cotter pin
to secure turnbuckle.
Make sure shallow jaw is up.
Up
Down