Guralp Systems CMG-CD24S6EAM - Manual (Page 9)

CMG-CD24S6EAM Introduction
2.3.2 Example sensor station
An example of a complete sensor station is shown in the figure below. The
dual outputs from each CMG-5TC sensor are split as shown, each feeding an
acquisition unit. In this arrangement there is a duplex system with full
redundancy from the sensor to the network outputs.
The supplied instruments are standard CMG-5TC accelerometers that have
been configured so that all outputs are low gain.
For more information on the instruments refer to the CMG-5TC manual
(MAN-050-0004) available from the Guralp Systems website:
www.guralp.com .
MAN-C24-0003 6 Issue A - May 2011