5 appendix e - connector pinouts, 1 sensor a & b, Appendix e – Guralp Systems CMG-CD24S6EAM User Manual
Page 34
Appendices
4.5
Appendix E - Connector pinouts
4.5.1 SENSOR A & B
This is a standard 26-pin “mil-spec” plug,
conforming to MIL-DTL-26482 (formerly
MIL-C-26482). A typical part-number is
02E-16-26P although the initial “02E” varies with
manufacturer.
Suitable mating connectors have part-numbers like
***-16-26S and are available from Amphenol, ITT
Cannon and other manufacturers.
Pin
Function
Pin
Function
A Vertical velocity +ve
P Calibration signal
B Vertical velocity –ve
R Vertical calibration enable
C N/S velocity +ve
S N/S calibration enable
D N/S velocity –ve
T E/W calibration enable
E E/W velocity +ve
U Centre
F E/W velocity –ve
V Active-high
G Vertical mass position
W Unlock
H
not connected
X Lock
J
N/S mass position
Y Logic signal ground
K Busy indicator LED
Z
not connected
L E/W mass position
a
not connected
M
not connected
b
Power 0 V
N Signal ground
c
Power +10 to +24 V
Wiring details for the compatible socket,
***-16-26S, as seen from the cable end
(i.e. during assembly).
31