3 using putty – Guralp Systems CMG-CD24S6EAM User Manual
Page 31
Appendices
Ensure the following parameters are set:
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
6.
Click on OK and the program will then connect provide you with a
terminal emulator screen, from which you can access the command line
of your system.
4.4.2 Using Hyperterminal with Windows Vista or Windows 7.
HyperTerminal is not provided with the Windows Vista or Windows 7
operating systems but the necessary files can be copied from the i386
directory of the Windows XP CD if you have one available. The two files you
will need are:
hypertrm.dll
hypertrm.exe.
If you do not have a Windows XP disc the files can be downloaded from:
To use Hyperterminal with Windows Vista or Windows 7:
1.
Copy the two files into your windows/system32 directory.
2.
To access HyperTerminal, use Windows+R on your keyboard. Enter
'hypertrm' and click on OK.
3.
If Windows open a security warning window click on Run. You may
also be asked if you wish to use HyperTerminal as a the default terminal
window.
4.
Now follow the instructions given in section 4.4.1, above.
4.4.3 Using PuTTY.
PuTTY is a free terminal package for windows which is useful if
HyperTerminal is not available. It can be downloaded from
The easiest package to use is the 'windows
installer'. Install PuTTY by following the on-screen instructions.
1.
Start PuTTY by clicking on the desktop icon or Start-menu entry
2.
Click on Serial at the bottom of the category menu on the left:
28