4 using the internal mass storage device – Guralp Systems CMG-CD24S6EAM User Manual
Page 13
Setting up the CMG-CD24S6EAM
8.
The 5 tabs that appear allow you to the view and change the port
settings. The default settings for the ports are given in Appendix A on
page 13.
Caution: Making any changes to the default settings may
cause the device to stop working.
9.
After making any changes click on the Submit button at the bottom of
each screen.
If you are unable to locate the device or have problems connecting, further
information is given in the EAM manual: MAN-EAM-0003.
Other menu items in the EAM allow for their control and configuration of the
CMG-CD24 digitisers, ports and other connected devices.
Any changes made in the EAM to the CD24 settings will be reflected in the
Lantronix WiPort NR data output.
3.4
Using the internal mass storage device
The acquisition unit has an internal mass storage device which is accessible
via the GPIO port (see section 2.2.1.3 on page 3).
To write to the internal mass storage device:
1.
Connect to the CMG-EAM as described in section 3.3 on page 8.
2.
Click on the Disc Recording link in the main menu.
3.
Select Internal USB storage from the Recording destination drop-down
menu.
When a USB host, such as a laptop or PC, is connected to the GPIO port,
internal circuitry detects the USB power and automatically connects the Flash
10