3 eam fast port default settings – Guralp Systems CMG-CD24S6EAM User Manual
Page 20
Appendices
4.1.3 EAM Fast Port Default Settings
Parameter
Setting
Main
Clear settings: Leave un-ticked
Run with priority: Tick
TCP server hostname: Leave blank TCP server
service: 20002 for Port A, 20001 for Port B
Station
Station name: Mandatory (shipped with the serial
number of the EAM).
Network name: Optional
Location name: Optional
If a common station name is used for a number of
sensors an additional location name is required to
ensure a unique identifier.
Main channels
Sample Rate: 100
High pass filter: Disabled
Enabled components: Z N E
Instrument Type: Accelerometer seismometer
Mux channels
Component/Instrument Type
Z/Mass position seismometer
N/ Mass position seismometer
E/ Mass position seismometer
0/Calibration input
0/Generic electronic test point
1/Generic electronic test point
2/Generic electronic test point
3/Generic electronic test point
Advanced
Link delay: Leave blank
GDI Multiplexor: Default data transport daemon
17