2 lantronix wiport nr default settings screenshots, 1 network settings – Guralp Systems CMG-CD24S6EAM User Manual
Page 17
Appendices
Parameter
Setting
Modem Escape Sequence Pass Through: Yes
Active connect: None
Modem Mode: None
Show IP Address After RING: Yes
Endpoint Configuration
Local Port: 10001 for Channel 1
10002 for Channel 2
Remote Port: 0
Auto increment for active connect: NA
RemoteHost: 0.0.0.0
Common options
Telnet Com Port Cntrl: Disable
Terminal Name: NA
Connect Response: None
Use Hostlist: No
Disconnect Mode
On Mdm_Ctrl_In Drop: No
Check EOT(Ctrl-D): No
Hard Disconnect: Yes
Inactivity Timeout: 0 : 0
NA
Configurable Pin Settings NA
4.1.2 Lantronix WiPort NR Default Settings Screenshots
4.1.2.1 Network settings
14