Gasboy 1000 Series FMS Card Encoding Manual - Manual (Page 34)

GASBOY Series 1000
7-6 03/07/03
CARD PUNCHING EXAMPLE
The following is an example of a typical card punching application. The card information being
punched is shown on the Card Encoding Form. Note that the fields and number of digits match
the card layout. The Card Punch Form shows the card information translated into the 5-bit code.
Step-by-step instructions are provided showing how to punch the information onto the card. The
completed card is displayed so you can check if you punched the card correctly.
Customer's Card Layout
COLUMNS 1-4 5-8 9-12 13-16 17 18 19
FIELD NAME SYSTEM
ID
CARD
NO.
Field 1
Employee
Field 2
Vehicle
PROD
LIMIT
PROD
AUTH
CHECK
DIGIT
# DIGITS/FIELD 4 4 4 4 1 1 1
Single xxxx xxxx xxxx xxxx x x x
Dual
Driver
Vehicle
xxxx
xxxx xxxx
hhhh
xxxx
hhhh
hhhh
xxxx
h
x h
x h
x
x means a digit (2 holes) is punched in the column.
h means all holes (5) are punched in the column.
Customer's Completed Card Encoding Form
FIELD NAME SYSTEM
ID
CARD
NO.
ID Field 1 ID Field 2 PROD
LIMIT
PROD
AUTH
CHECK
DIGIT
# DIGITS/FIELD 4 4 4 4 1 1 1
REFERENCE 9813 1141 6352 7413 3 2 1
Customer's Completed Card Punching Form