Gasboy 1000 Series FMS Card Encoding Manual - Manual (Page 16)

GASBOY Series 1000
3-6 03/07/03
Table 3-2 Product Code Assignments Table 3-3. Product Authorization Codes
Product Code
(2 digits)
Description Auth.
Code
Product Codes Allowed
(Up to 9)
0
1
2
3
4
5
6
7
8
9
Series 1000-CFN Card Compatibility.
Your Series 1000 card layout may have a price level code to match a CFN System. The price
level code is used by the CFN System only, and will be ignored by the Series 1000 System. See
your card layout.
Manual Entry Check Digit
The Manual Entry Check Digit is a one-digit field used to determine what data must be entered at
the keypad.
For dual mag cards, a different check digit may be on each card. This allows the check digit to
relate to the particular card on which it is encoded. For example, the odometer check digit is
usually associated with the vehicle card, whereas the Personal Identification Number (PIN) check
digit is usually associated with the employee card. This is encoded by using a check digit of 1 on
the vehicle card and a check digit of 4 on the employee card. See the Required Manual Entries
Table for the various check digit codes.
Series 1000 - CFN Card Compatibility.
If your Series 1000 has been configured to match a CFN system with a check digit on both dual
cards, the digit must be the same on each card.
For dual optical cards, a check digit is encoded on only one card, typically the vehicle card. On
the other card, all of the holes are punched in the check digit position. See Table 3-4, Required
Manual Entries for the various check digit codes.