Gasboy 70 Series Installation - Manual (Page 6)

72 Split
Introduction Warranty
Page 2 MDE-4673 Consumer Electric Pumps Installation / Operation / Parts Manual · May 2007
These models are used on the Vented Tanks.
Installation Options
• Direct-mount above underground tanks
• Pedestal-mount for remote underground
• Aboveground skid tanks
Specifications
• Pumping Unit: Self-priming, direct-drive rotary vane; 23 psi (1.6 bars)
stainless steel bypass; check valve with pressure relief valve.
• Motor: 1/3 HP (0,25kw), 1725 rpm motor with thermal overload
protection and auxiliary AC line. Standard 115 VAC, 60 Hz; optional
230 VAC, 50 Hz.
• Register:
-72S: 4-wheel push-button reset, 7-digit master totalizer.
-1820: 3-wheel, volume only; lever-type reset with interlock; 6-digit
master totalizer (optional, except for 1820R: 4-wheel push-button).
-Registration options: US gallons, Imperial gallons, liters.
• Meter: Nutating disk phenolic measuring chamber in aluminum diecast
housing; adjustable calibration +.5% at full flow
• Hose & Nozzle: 12’ (4 m) Underwriters Laboratories (UL ® )-Listed hose assembly with
integral static discharge wire; manual self-closing nozzle.
• Connections: 2" NPT for tank opening; 1" suction; 3/4" NPT discharge
• Strainer: 100-mesh nylon
• Delivery Rate: 18 GPM, at 115V, 60 Hz.; 68 LPM at 60 Hz.; 57 LPM
at 50 Hz.
Warranty
For information on warranty, refer to MDE-4255 Gasboy’s Warranty Policy Statement. If you
have any warranty-related questions, contact Gasboy’s Warranty Department at its
Greensboro location.