Gasboy ADDS 4000 - Manual (Page 11)

MDE-4604 ADDS 4000 Terminal and Okidata® Printer Installation Instructions · February 2007 Page 11
Installation of the ADDS 4000 Terminal and Okidata Printer
To install the Okidata printer, proceed as follows:
1 Press SELECT to turn the printer offline. The SELECT light will go off.
2 Position the print head at the top of the paper and press TOF SET.
3 Press SELECT to put the printer back online. The SELECT light will turn on.
4 Press MODE until the light next to the HSD is lit.
5 Press PITCH until the light next to 17 is lit.
Note: Pitch may be set to a lower number (resulting in larger print) if transactions are less
than 80 characters.